 |
|
|
|
|
|
|
Videowall-Cube SDV52
/ 132cm Diagonale
pro Cube
The rear-projection modules 52”- for tiled datawall application, are
suitable for control rooms, briefing rooms, surveillance and visual
messaging information points, delivering unsurpassed image quality for
a crystal clarity display.
Image Quality
Based on Digital Light Processing® technology from Texas Instruments
and state-of-the-art proprietary optical engine, the 52”
rear-projection modules have been designed to yield bright and high
contrast image display, featuring high resolution, good brightness
uniformity, excellent colorimetry and grey level rendering on large
screens. Special design effort has resulted in noise and flicker free
projection. The variety of different available analog and digital
inputs allows the 52” cube to be effectively used both for graphic data
and video pictures display. These modules incorporate Black Bead™
screens with “Zero Mullion” (<0,3 mm) and sophisticated mechanical
alignment to produce a near seamless image across even the largest
digital wall.
Versatile Image Control
For display operations, these modules can easily be connected to an
external image controller for multiple input window managing. Moreover,
the internal image processing and resizing capabilities of the SDV
series can be effectively exploited in smaller applications, thanks to
the number of different analog and digital input connections.
Continuous monitoring and control of the Videowall operating parameters
during operations is achieved through a serial protocol based control
software, via RS485/232 connection or, optionally, via USB port or even
via LAN.
Maintenance
The SDV 52” modules have been designed with particular attention in
minimizing maintenance operations. From the rear service panel, service
engineers and installation technicians can easily access the
rear-projection engine, lamp, electronics optics and first surface
glass mirror in a few minutes, hence keeping the maintenance downtime
at minimum. Lamp replacement and dust deposit removal are the only
routine operations to be easily done from time to time.
SDV52C
U271
- 52” Digital Display based on 1-chip DLP® technology
- Native resolution XGA (1024x768)
- Designed for 24/7/365 operation
- New DDR-DarkChip2™-12° for an excellent contrast ratio (>1000:1)
- Low Depth (62,6 cm)
- Aspect Ratio 4:3
- “Zero Mullion” screen (<0,3 mm), Black Bead™
- Long life lamp (6.000 hrs)*
- Analog graphic and video inputs
- DVI Input
- 6 mechanical adjustments for optimal picture alignment
Designed for continuous operation 24h/7/365 with a minimum of maintenance, the
SDV52C U271 integrates cutting edge DLP® technology into 50" class Display Wall
systems. The long average life of a 6.000-hours (*) rated 100-120W VIP lamp ensures
low power dissipation, long lasting operations and “burn-in” effect free display at
any time. The SDV52C U271 is specifically designed to enhance the digital
benefits offered by DLP® technology.
< /a>
SDV52C U291
- 52” Digital Display based on 1-chip DLP® technology
- Native resolution SXGA+ (1400x1050)
- Designed for 24/7/365 operation
- New LVDS Chip -12° for an excellent contrast ratio (>2000:1)
- Low Depth (65 cm)
- Aspect Ratio 4:3
- “Zero Mullion” screen (<0,3 mm), Black Bead™
- Long life lamp (10.000 hrs)*
- Analog graphic and video inputs
- DVI Input
- 6 mechanical adjustments for optimal picture alignment
Offering high brightness and contrast ratios, DLP® SXGA+ technology is
optimized for the growing high-resolution requirements of the control
room applications as well as fixed installations and large conference
room settings. The inherent advantage of the single-chip architecture
assures no misalignment over time, ensuring consistent, sharp images.
The inherent durability of the DMD and the long average life of a
10.000-hours (*) rated 100-120W VIP dimmable lamp, ensure low power
dissipation, long lasting operations and “burn-in” effect free display
at any time. The SDV52C U291 is designed to reliably work in 24h/7/365
days facilities. (*)= in a 100W configuration.
< /a>
SDV52C U301
- 52” Digital Display based on 1-chip DLP® technology
- Native resolution SXGA+ (1400x1050)
- Designed for 24/7/365 operation
- New LVDS Chip -12° for an excellent contrast ratio (>2000:1)
- Low Depth (72 cm)
- Aspect Ratio 4:3
- “Zero Mullion” screen (<0,3 mm), Black Bead™
- Incorporates dual lamp system auto-exchange (hot swapping of failure lamp)
- Analog graphic and video inputs
- DVI Input
- 6 mechanical adjustments for optimal picture alignment.
The SDV52C U301 comes with an advanced dual-lamp system for ultimate
reliability.
The inherent durability of the DMD ensures low power dissipation, long
lasting operations and “burn-in” effect free display at any time. The
dual lamp system guarantees the total efficiency of your Videowall and
the lamp change is automatic, made without the intervention of the
operator. The second lamp brings redundancy to the system and
guarantees an image at all times, in fact the 'redundant' lamp starts
up after lamp failure of the 'master' lamp. The SDV52C U301 is designed
to reliably work in 24h/7/365 days facilities. With this innovative
dual lamp solution SIM2 provides constant perfect display quality even
when switching from one lamp to the other.
< /a> SDV52C
U370
- 52” Digital Display based on 1-chip DLP® technology
- Native resolution XGA (1024x768)
- Designed for 24/7/365 operation
- New LVDS Chip -12° for an excellent contrast ratio (>1000:1)
- Low Depth (72 cm)
- Aspect Ratio 4:3
- New WA lens (Wide Angle)
- “Zero Mullion” screen (<0,3 mm), Black
Bead™
- Dual lamp system auto-exchange (hot swapping of failure
lamp)
- Analog graphic and video inputs
- DVI Input
- 6 mechanical adjustments for optimal picture alignment.
The SDV52C U370 incorporates innovative, DLP® Single Chip
technology for a superb image quality. The new LVDS -
12° Chip enables the SDV52C U370 to deliver both an impressive
and superb contrast, resulting in a perfect image quality.
It delivers outstanding color and brightness uniformity.
The dual lamp system guarantees the total efficiency of
your Videowall and the lamp change is automatic, made
without the intervention of the operator.
|
|
|
|
|
